[W4FHU] Last nights meeting and a correction to the plans.

[Joel]

It was great to see everyone so involved with the project at last nights
meeting.  When people ignore all the great snacks to stay building their
project, I consider it a success.

 

It has been brought to my attention that there could be a problem in the
instructions for the red wires placement.  The red wire goes between the
common radio ground , using say hole K-12 to hole P-13 - The chip.  The
early directions on-line said a different hole.  The bottom line is the red
wire jumper HAS to end up at pin 4 of the chip.  So you need to use pin P-13
to have it come out right next to the chip's bottom left-hand most pin (When
viewed from the bottom)  The picture is correct.

 

>From the bottom, the chip counts clockwise as:




6

 

1


5

2


4

3

 

The website will have any updates to the instructions.

 

Joe Loucka  AG4QC

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://w4fhu.org/pipermail/w4fhu_w4fhu.org/attachments/20090821/c266a47f/attachment.html>